1. Manuals
  2. Brands
  3. Sapido Manuals
  4. Security Camera
  5. IPJC1n
  6. User manual

Sapido IPJC1n User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Sapido
IPJC1n User Manual
V1.0.0

Advertisement

Table of Contents
loading

Summary of Contents for Sapido IPJC1n

  • Page 1 Sapido IPJC1n User Manual V1.0.0...
  • Page 2 FCC Caution FCC Part 15.19 Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to • the following two conditions: ◦ this device may not cause harmful interference and ◦ this device must accept any interference received, including interference that may cause undesired operation This device and its antenna(s) must not be co-located or operating in •...
  • Page 3 Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which • the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. • CE Statement of Conformity Our product has been tested in typical configuration by Ecom Sertech Corp and was found to comply with the essential requirement of “Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic...

  • Page 4: Built-In Speaker

    Chapter 1.Introduction With its built-in high performance image and voice sensor, the IPJC1 be placed in your living room, office, or anywhere else, you would like to keep an eye on things, with no PC required and building surveillance where clearer video and more image detail are required.
  • Page 5 and status. IPJC1 can detect 3.5G system and connect to Internet automatically. If user changes Internet-connecting way to Ethernet, IPJC1 will detect it and connect Internet automatically. USB File Sharing IPJC1 supports one USB 2.0 port .plug-in usb disk to be storage or plug-in 3.5G dongle to be a WAN interface.
  • Page 6 NO. LED Function Color Status Description Power *1 Power indication Green On Power is being applied to this product Green On Wireless is enable Green Blinking3 Data is transmitting or receiving Wireless/ Wireless/WPS indication Blinking WPS Enable WAN port Green On 10/100 Mbps Ethernet is connected activity Blinking3...
  • Page 7 20ms Webcam Webcam status Green On Webcam is ready ststus Blinking Recording image Speaker Speaker enable Green On Speaker is ready power 3.2 The Real Panel The following parts are located on the rear panel POWER: The Power socket is where you will connect the power adapter.
  • Page 8 Reset: Pressing this button for more than 5 seconds for default reset IPJC1. USB Port: Connect to the USB Device,ex:USB storage or 3.5G dongle LAN PORT: connect the Router to the PC or Ethernet WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet Mode switch : switch to “Router more”...

  • Page 9: Chapter 4.Connecting The Router

    Chapter 4.Connecting the Router 1.Power On the IPJC1,waiting for 30 seconds 2.PC connect to the one of LAN port of IPJC1 by RJ-45 cable 3.ADSL or upper Router connect to WAN port of IPJC1 4.Open the pc’s browser(ex:IE) and key-in 192.168.1.1 in address bar, if connection is fine,you can connect to IPJC1 and show the login page.
  • Page 10 • Users can set or change user name and password for accessing the web management interface in this section. • Input New Password, then input confirm password again.

  • Page 11: Chapter 5.Configuring The Router

    Chapter 5.Configuring the Router 5.1 Home Page After login in IPJC1,Home page is showed first as below.User can know the firmware version 、 WAN type 、 Connection status 、 SSID 、 connected USB device 、 Client Number. It help you understand the current status of IPJC1 quickly. And when user press the “HOME”.All configure is showed .User can configure those setting according requests.
  • Page 12 Item Description Internet Setup There several different method access Internet PPPoE DHCP Static ， 、 、 IP、PPTP、L2TP、WiFi ISP、3.5G、smart phone、 LTE If a router is already set at the house, and you want to make the wireless LAN communication WiFi AP When you connect to the internet wirelessly through PC and wireless device without wireless LAN function equipped.
  • Page 13 Office Control For office environment，there are Multiple AP、Wireless Access Control、IP Filtering、IP Binding and QoS File Menu There are Samba Storage and FTP server features Webcam server For image record (AVI JPEG) VPN Server PPTP/L2TP general setup introduction. Denial of Service Remote management This page allow you to access the GUI on WAN.
  • Page 14 5.1.1 PPPoE If your ISP provides a PPPoE connection,Select PPPoE option, And you should enter the "User name" and "Password" Item Description User Name Input your user name provided by your ISP. If you don’t know, please check with your ISP. Password Input the password provided by your ISP.
  • Page 15 5.1.2 DHCP If your ISP provides the DHCP service, please choose DHCP type ,and the IPJC1 will automatically get IP parameters form your ISP or other Router Item Description MAC type Select "Universal” or “Specific" Universal：clone controller PC mac address as IPJC1 WAN mac address Specific：use IPJC1 itself mac address Wireless AP...
  • Page 16 5.1.3Static IP If your ISP provides a static or fixed IP address ,Subnet Mask, Gateway and DNS setting,select Static IP. Item Description IP Address Enter the IP address which is provided by your ISP. Subnet Mask Please enter the Subnet Mask address Gateway Input ISP Default Gateway Address.
  • Page 17 5.1.4 PPTP If your ISP provides PPTP connection, please select PPTP option and you should enter PPTP Server IP Address 、 User Name 、 Password Item Description Address Mode Select "Dynamic" or "Static" Server IP Address Input your server IP address provided by your ISP. If you don’t know, please check with your ISP.
  • Page 18 5.1.5 L2TP If your ISP provides L2TP connection, please select PPTP option and you should enter L2TP Server IP Address 、User Name 、Password Item Description Address Mode Select "Dynamic" or "Static" Server IP Address Input your server IP address provided by your ISP. If you don’t know, please check with your ISP.
  • Page 19 Item Description Survey List all available wireless AP Pre-Shared Key Input the wireless AP key which you want to connect Extend SSID Provide SSID for wireless client which want to connect to IPJC1 Encryption Select wireless encryption type form the drop-down list. 5.1.7 3.5G IPJC1 also supports 3.5G to be a wan type.User plugs the 3.5G USB dongle in USB port and set the SIM pin code, press "Apply"...
  • Page 21 5.1.8 Smartphone User also plug-in the smart phone to be a wan type.IPJC1 supports almost smart phone in the market Item Description Service IPJC1 support 4 kinds of smart phone、Nokia、Black Berry、Sansung、iPhone and Andriod phone iPhone and Andriod phone do not need to do any setting，all you need is to turn on hotspot function and connect it to USB port Region...
  • Page 22 Encryption Select wireless encryption type form the drop-down list. 5.1.9 LTE The LTE service is not ready as now in Taiwan. Item Description Mode Input your user name provided by your ISP. If you don’t know, please check with your ISP. Network Traffic Monitor IPJC1 will record LTE traffic usage volume...
  • Page 23 support the auto Detect function as default,you can plug-in the cable of wan connect to wan port, the Router to automatically search your Internet connection for servers and protocols. The connection type will be reported when an active Internet service is successfully detected by the Router.
  • Page 24 Item Description Wireless AP Turn on/off wireless SSID Service Set identifier, users can define to any or keep as default. Encryption Select wireless encryption type form the drop-down list. Wireless AP Turn on/off wireless...
  • Page 25 5.3 WiFi AP Mode If user don't connect wan port via wire cable in your enviroment, User can also choose WiFi AP mode which connect to a upper router via wireless communication.please move the switch to left side(show as below) to be wifi ap mode In the mode, all clients get IP from upper side(other Router) device,IPJC1 don't assign the IP to client.so this mode does not support...

  • Page 26: Firmware Upgrade

    Item Description Survey List all available 2.4G wireless AP Pre-Shared Key Input the wireless AP key which you want to connect Extend SSID Provide SSID for wireless client which want to connect to IPJC1 Encryption Select wireless encryption type form the drop-down list. 5.4 Firmware Upgrade This function can upgrade the firmware of the router.
  • Page 27 5.4.2 Manual upgrade If you download firmware from website, you can upgrade firmware manual .

  • Page 28: Parental Control

    5.5 Parental Control Parental Control provide URL Filtering and MAC Filter Schedule And scheduled the access time of wireless signal for setup. 5.5.1 URL Filtering URL Filtering is used to restrict users to access specific websites in internet Item Description Enable URL Filtering Please select Enable MAC Filtering to filter MAC addresses...

  • Page 29: Mac Filter Schedule

    5.5.2 MAC Filter Schedule When enabled, filtering will be based on the MAC address of LAN device(computers and cell phone). Any device with its MAC address on this list will be blocked from accessing the Internet. User can set the schedule with "Disable" or "Enable one rule for all devices at the time"...

  • Page 30: Wireless Schedule

    Disable Disable the MAC Filter function Enable all Mac Filter Enable one rule for all devices at the time schedule Enable Mac Filter Enable rules for specific device schedule Apply Click on Apply to save the setting data. Save Save the setting Refresh Clear all configure before save the setting 5.5.3 Wireless Schedule...
  • Page 31 5.6 Office Control Office control provide Multiple AP、Wireless Access Control、IP Filtering、IP Binding、QoS 5.6.1 Multiple AP The IPJC1 can register up to 4 SSIDs (wireless LAN group). It can be used as if there are multiple wireless LAN access points with one product. Item Description Enable...
  • Page 32 simple comment and click on “Apply Change” to save the new addition. To delete a MAC address, select its corresponding checkbox under the Select column and click on “Delete Selected” button. 5.6.3 IP Filtering When enabled, LAN clients are blocked / filtered from accessing the Internet based on their IP addresses Item Description...
  • Page 33 5.6.4 IP Binding This function allows you reserve IP addresses, and assign the same IP address to the network device with the specified MAC address any time it requests an IP address. This is almost the same as when a device has a static IP address except that the device must still request an IP address from the DHCP server.
  • Page 34 5.6.5 QoS QoS acts as a “bandwidth manager” to ensure that those programs that are sensitive to lag are given as much bandwidth as possible to avoid lag. This feature makes an impression immensely when users are streaming video or music and especially when playing online games where lag often means “Game Over”.

  • Page 35: Aircloud Storage

    5.7 Aircloud Storage Only support one USB disk for Samba and FTP Samba supports the file access via USB disk in local LAN FTP service provides a file server via USB disk for internet access 5.7.1 Samba Storage Item Description Share mode User can access USB disk without account and password...
  • Page 36 Item Description Enable FTP Server FTP server start or stop Enable Anonymous to Agree anonymous account login to FTP server Login Enable FTP Access Allow user access device FTP server from WAN from WAN side（internet） FTP Server Port Default FTP server port is 21 Idle Connection Time- FTP process should have an idle timeout, which will terminate the process and close the control connection if...

  • Page 37: Aircloud Monitor

    5.8 Aircloud Monitor The IPJC1 built-in an webcam ,It can previews and recordes the pictures.If user want to record the pricture, a saved folder is need.It can assign a USB disk or remote FTP server to save the recorded pictures. Webcam server only support one webcam Item Description USB Port Information...
  • Page 38 The webcam can preview the video on web.user press the "Start webcam recodes" button to record the image or stop it. Archive Format Setting-This page can set servel parameters Frame:Frameis the frequency at which an imaging device produces unique consecutive images called frames Resolution: A measure of digital audio quality White Balance:White balance is the process of removing unrealistic color casts, so that objects which appear white in person are rendered white in your photo...

  • Page 39: Recording Settings

    Recording Settings This page can choose where is saved destination .It can be USB disk or remote FTP. If user want to save the file as AVI file. USB disk in only one choose.

  • Page 40: Detect Settings

    Detect Settings This page can set motion detect and audio detect function. It can be enabled or disabled.and choose the saved location.
  • Page 41 Rocording Schedule IPJC1 can also set the schedule of recode .Once the time is in the range of schedult .webcam will record the image automation.

  • Page 42: Vpn Server

    5.9 VPN Server The VPN Server function providing PPTP/L2TP mode are designed to allow users to an external network device / computer and office local area network to establish a secure network connection. And User can safe login office local area network and access to personal documents, files Sharing and other resources.
  • Page 43 5.10 DoS DoS (Denial of Service) is a protection mechamism . Select the Disable or Home or Enterprise to ask IPJC1 provides protection of different level .Enterprise level can provides the highest level protection but it maybe affect the router's proformace more. Item Description Disable...

  • Page 44: Remote Management

    5.11 Remote Management This page allows you to set which port can access the router's GUI on WAN or disable it to avoid any connect on WAN. Item Description HTTP Connection Port Users can access GUI by this port，default is 80 If the port is changed,The URL address is also changed ,For example,the http port is set 5000, the login URL address must be “192.168.1.1:5000”...
  • Page 45 5.12 Status If user want knows the current status of router, including which WAN type is avaliable, how many clients is connected and how many USB device is plugin IPJC1 WAN status and configuration • LAN status and configuration •...
  • Page 46 Client status and configuration • Allow or block client to access internet USB status and configuration •...

  • Page 47: Factory Default

    5.13 Factory Default Reset the current configuration to factory default. 5.14 Reboot Reboot the router 5.15 Logout Exit the router...

  • Page 48: Advance Setup

    5.16 Advance Setup The almost function can be set in general function block.Advance setup is more detail setting for advance user. 5.16.1Internet Mode Internet Setup Please refer Internet Setup Please refer AP mode WiFi AP Please refer WiFi AP mode WiFi ISP Please refer WiFi ISP mode...
  • Page 49 Item Description User Name Input your user name provided by your ISP. If you don’t know, please check with your ISP. Password Input the password provided by your ISP. Service Name Input the service name provided by your ISP. Connection Type Three types for select: Continues, Connect on Demand, and Manual.
  • Page 50 DHCP Item Description Host Name You can keep the default as the host name, or input a specific name if required by your ISP. MTU Size Maximum Transmission Unit. Usually provide by computer operation systems (OS). Advanced users can set it manually. Select Attain DNS Automatically.
  • Page 51 Static IP Item Description IP Address Enter the IP address which is provided by your ISP. Subnet Mask Please enter the Subnet Mask address Gateway Input ISP Default Gateway Address. MTU Size Maximum Transmission Unit. Usually provide by computer operation systems (OS). Advanced users can set it manually.
  • Page 52 PPTP Item Description Enable Dynamic Route Enable or Disable dynamic route IP Address Enter the IP address which is provided by your ISP. User Name Input PPTP account provided by your ISP. Password Input the password provided by your ISP. MTU Size Maximum Transmission Unit.
  • Page 53 to "Clone MAC Address" Save & Apply Click on Save to save the setting date, the Apply button for execute current configuration. L2TP Item Description Enable Dynamic Route Enable or Disable dynamic route IP Address Enter the IP address which is provided by your ISP. User Name Input L2TP account provided by your ISP.
  • Page 54 3.5G Item Description Mode Input your user name provided by your ISP. If you don’t know, please check with your ISP. Network Traffic Monitor IPJC1 will record 3.5G traffic usage volume Limit Internet Traffic User can limit 3.5G traffic usage volume to prevent over budget Connection Speed Provide 3 kinds of speed，auto is recommended...
  • Page 55 Smart Phone Item Description Region Select correct phone service region Select correct phone service ISP Phone Type IPJC1 support 4 kinds of smart phone、Nokia、Black Berry、Sansung、iPhone and Andriod phone iPhone and Andriod phone do not need to do any setting，all you need is to turn on hotspot function and connect it to USB port Provide 3 kinds of speed，auto is recommended Connect Speed...
  • Page 56 Select Attain DNS Automatically. Or select Set DNS Manually, if you want to specify the DNS, and enter the DNS provided by your ISP in DNS 1 2 3. Clone Mac Address Some ISPs require MAC address registration. In this case, enter the MAC address registered to the provider to "Clone MAC Address"...
  • Page 57 Item Description Mode Input your user name provided by your ISP. If you don’t know, please check with your ISP. Network Traffic Monitor IPJC1 will record 3.5G traffic usage volume Limit Internet Traffic User can limit 3.5G traffic usage volume to prevent over budget Connection Speed Provide 3 kinds of speed，auto is recommended...
  • Page 58 Use this page to set up the local IP address and subnet mask for your router. Please select LAN Interface Setup under the IP Config menu and follow the instructions below to enter the LAN setting page to configure the settings you want. Item Description IP Address...
  • Page 59 deadly to a network. Clone MAC Address Copy the MAC address from the device you had registered to your ISP if your ISP asks for the specific MAC Address. DDNS You can assign a fixed host and domain name to a dynamic Internet IP address. Each time the router boots up, it will re-register its domain-name-to-IP-address mapping with the DDNS service provider.
  • Page 60 5.16.3 Ipv6 Config IPV6 is the latest revision of the internet protocol, the communication protocol that provides and identification and location system for computers on networks and routes traffic across the internet. Ipv6 is intended to replease Ipv4 ,which still carries the vast majority of intenet traffic as now Item Description...
  • Page 61 5.16.4 Wireless User can set serval improtant wireless basic setting in here ,ex:SSID,ESSID,channel width,channel number. also can Disable or Enable the wireless signal. There are two separates page with 2.4Ghz . Item Description Disable Wireless Turn off the wireless service. Band-2.4GHz Select the frequency.
  • Page 62 * In Wi-Fi AP mode only support Client mode. Network Type Infrastructure：one of the two methods for • connecting to wireless networks with Wi-Fi enabled devices such as laptops, Pda’s I-phone etc. These devices are connected to wireless network with the help of Access point (AP). Wireless Access Points are usually routers or switches which are connected to internet by Ethernet port.

  • Page 63: Advanced Settings

    Advanced Settings Item Description Fragment Threshold To identify the maximum length of packet, the over length packet will be cut. The allowed range is 256-2346, and default length is 2346. RTS Threshold This value should remain at its default setting of 2347. The range is 0~2347.
  • Page 64 packets are transmitting. Short GI Users can get better wireless transmission efficiency when they enable this function. WLAN Partition Shut down the communication between the connected wireless LAN devices. If you set up as "Enabled", devices connected with the router, such as a printer, will not be able to use.
  • Page 65 Security Here users define the security type and level of the wireless network. Selecting different methods provides different levels of security. Please note that using any encryption may cause a significant degradation of data throughput on the wireless link. There are five Encryption types supported: “None”, “WEP”, “WPA”, ”WPA2”, and “WPA-Mixed”.

  • Page 66: Access Control

    communication, so it can communicate safer than WEP key which uses single encryption key for long time. "AES" is harder to decode comparing to "TKIP", so it can say tougher encryption scheme than "TKIP" WPA-Mixed Support WPA and WPA2 at the same time 802.1x Authentication For radius server authentication Radius...
  • Page 67 Access Point in a minute without any hassle. SAPIDO IPJC1 could support both Self-PIN or PBC modes, or use the WPS button (at real panel) to easy enable the WPS function.
  • Page 68 Wireless dongle should connect to IPJC1 Start PBC: • ◦ Press the IPJC1 WPS button and wait for WPS LED blinking ◦ Press the dongle WPS button ◦ Wireless dongle should connect to IPJC1 When selected in the Basic Settings page and enabled here, Wireless Distribution System (WDS) enables the router to be used as a wireless bridge.
  • Page 69 b Please check the MAC address c Enable WDS function from the page – “WDS Setting”, and then fill in the MAC address of Router_B. Click Apply Changes to save the setting data d The WDS AP List will show the WDS device MAC address...
  • Page 70 Router_B： a Setup Router_B WDS b Router_B LAN PC will get IP address from Router_A If you failed the WDS setting, please check you setting with refer to the list below...
  • Page 71 Wireless Schedule Please refer Wireless Schedule 5.16.5NAT This section contains configurations for the IPJC1 ’s advanced functions such as: virtual server, and DMZ to provide your network under a security environment The DMZ feature allows one local user to be exposed to the Internet for special- purpose applications like Internet gaming or videoconferencing.

  • Page 72: Virtual Server

    Virtual Server The Virtual Server feature allows users to create Virtual Servers by re-directing a particular range of service port numbers (from the WAN port) to a particular LAN IP address. Item Description Enable Port Select to enable Port Forwarding service or not. Forwarding Address Specify the IP address which receives the incoming...
  • Page 73 5.16.6 AirCloud Storage Please refer File Menu 5.16.7 AirCloud Monitor Please refer Webcam Server 5.16.8 VPN Server Please refer VPN Server 5.16.9 Firewall Please refer...
  • Page 74 Item Description Enable QoS Check “Enable QoS” to enable QoS function for the WAN port. You also can uncheck “Enable QoS” to disable QoS function for the WAN port. Automatic uplink speed Check the Automatic uplink speed. Manual Uplink speed Input uplink bandwidth manually Automatic downlink Check the Automatic downlink speed.

  • Page 75: Port Filtering

    Port Filtering Item Description Enable Port Filtering Select Enable Port Filtering to filter ports. Port Range Enter the port number that needs to be filtered. Protocol Please select the protocol type of the port. Click on Add to save the setting data. Current Filter Table Check ISP to get IP address and default gateway IP address...
  • Page 76 IP Filtering Please refer IP Filtering MAC Filter Schedule Please refer Mac Filter Schedule URL Filtering Please refer URL Filtering IP Binding Please refer IP Binding VLAN Item Description Forwarding Rule Bridge or NAT mode Add VLAN tag to packet Set VLAN ID（1~4096 ）...

  • Page 77: Wake-On-Lan

    5.16.10System Management This section including Wake on LAN, Change Username/Password, Upgrade Firmware, Profiles Save, Remote Management, Time Zone, UPnP, Route Setup, VPN Passthrough, and Wan Type Auto Detection. It is easy and helpful for users making more detailed settings Wake on LAN Switch your computer ON through your LAN or the Internet .

  • Page 78: Profiles Save

    Profiles Save Users can create a backup file that contains current router settings. This backup file can be used to restore router settings. This is especially useful in the event you need to reset the router to its default settings. Remote Management This page allows you to access the GUI on WAN Item...
  • Page 79 Time Zone Users can select time zone and synchronize the local clock on the router. UpnP UpnP • Universal Plug and Play (UPnP) is a standard of networking protocols promulgated by the UPnP Forum. The goals of UPnP are to allow devices to connect seamlessly and to simplify the implementation of networks in the home (data sharing, communications, and entertainment) and in corporate environments for simplified installation of computer components.

  • Page 80: Route Setup

    Route Setup Dynamic routing is a distance-vector routing protocol, which employs the hop count as a routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The maximum number of hops allowed for RIP is 15 Static routing is a data communication concept describing one way of configuring path selection of routers in computer networks.

  • Page 81: Vpn Passthrough

    VPN Passthrough Virtual Private Networking (VPN) is typically used for work-related networking. For VPN tunnels, the router supports IPSec, Pass-through, PPTP Pass-through, and L2TP Pass-through. Item Description IPSec Pass-through Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer.
  • Page 82 Wan Type Auto Detection When this function enable， IPJC1 can detect WAN connection way，ethernet（PPPoE、DHCP、Static IP）、3.5G、LTE...
  • Page 83 Chapter 6.Q & A Why can't preview camera image via browse in GUI? • A:User needs to setup the VLC( plug-in package in VLC media player ) computer. Where can I get the record image of camera? • A:If user save record image in USB disk of IPJC1.Go to “webcam” folder find Where is the XDSL Router installed on the network? •...
  • Page 84 I don't know my WAN IP. • A:There are two ways to know. Way 1:Check with your Internet Service Provider. Way 2:Check the setting screen of IPJC1 . Click on Status & Log item to select Network Configuration on the Main Menu. WAN IP is shown on the WAN interface.
  • Page 85 Internet Explorer Users: ◦ Click on Tools > Internet Options > Connections tab. ◦ Select never dial a connection, click on Apply button, and then click on OK button. ◦ Click on Tools and then click on Internet Options. ◦ Click on Connections and then click on LAN Settings. ◦...
  • Page 86 would be written into memory, please reboot the device via Reboot under System Management directory. Why couldn’t my wireless notebook work on-line after checking? • A:Generally, Wireless networks can sometimes be very complicated to set up, particularly if you're dealing with encryption and products from different vendors.
  • Page 87 192.168.1.254. Also, the Network Mask should be set to 255.255.255.0 to match the Wireless Router. In Windows, you can check these settings by using Control Panel ~ Network to check the Properties for the TCP/IP protocol. The WinXP wireless interface couldn’t communicate the WEP with SAPIDO •...
  • Page 88 IPJC1’s wireless interface. A:The default WEP of WinXP is Authentication Open System - WEP, but the WEP of SAPIDO IPJC1 is only for Shared Key - WEP, it caused both sides couldn’t communicate. Please select the WEP of WinXP from Authentication Open System to Pre-shared Key - WEP, and then the WEP wireless interface between WinXP and SAPIDO IPJC1 would be communicated.
  • Page 89 What is the maximum number of IP addresses that the XDSL Router will • support? A:The Router will support to 253 IP addresses with NAT mode. Is the Router cross-platform compatible? • A:Any platform that supports Ethernet and TCP/IP is compatible with the Router.

This manual is also suitable for:

Ipjc1

Table of Contents