Panasonic FP-7718 Operating Manual page 21

Margin reduction ratio
UPO5 | @ Selects the reduction ratio tn
margin mode
UPO6
UPO7
UP0O8
UPOS9
(0) Non (100%) (1) 95%
(2) 93% (3) 91%
Sorter mode default
@ Determines the most frequent
usage mode
(0) Nonsort
(2) Staple sort
(1) Sort
(3) Group
Duplex mode default
@ Determines the most frequent
usage mode
(0) No (1) (1) => (2)
(2) (2) = [2] (3) Book = [2]
2 In 1 copy ratio
@ Selects whether to copy full size
or reduction in the 2 in 1 mode
(0) Fullsize (1) Reduction
Auto edge mode default
@ Selects whether or not to disable
Auto Edge Deletion'
(0) OFF (1) ON
Skyshot mode default
@ Enables or disables the use of
skyshot mode
(0) OFF (1) M1, ON
(2)M2,ON (3) M1, M2 ON
—_
su)
7)
a)
pas
a
he
o
""
—
(0) OFF (1) ON
Toner ts rapidly added after
UP10
UP11
entering the number (1) and
pressing Print key
UP12
UP19 Set key operator code
@ Input key operator ID number
Manual add toner
@ Allows the addition of toner as
determined by the operator
NOTE *« Auto Edge Deletion
To copy from the platen with the original cover or -ADF open Normally, this
makes a copy with a solid (black) area around the original tf the original is
smailer than the copy paper This mode eliminates the solid area
automatically
@ Skyshot mode (UP 10 or c10) disables the use of the other job run memory
21