Samsung WA52J8060A Series User Manual page 35

Garment Plus
You can add or take out laundry items even
after the wash has started, as long as the
Garment Plus indicator is on. Pressing
Start/Pause unlocks the lid. If you open the
lid and want to continue the wash cycle,
close the lid, and then press Start/Pause.
NOTE
If you have activated the Child Lock, you
must deactivate it first. See page 33.
My Cycle
Lets you save a custom wash cycle
(temperature, spin, soil level, etc.) and
then recall and use it with one button
convenience.
To save a cycle and selected options as your
My Cycle, follow these steps:
1, Press Power.
2, Select a cycle using the Cycle Selector.
3, After cycle selection, set each option.
NOTE
See the "Cycle chart" section on page 63 for
available option settings with each cycle.
4, You can then store the selected cycle
and options by pressing and holding
My Cycle for longer than 3 seconds.
The cycle and options you select will be
displayed the next time you choose the
My Cycle function.
5, Press My Cycle to load and use the
saved My Cycle options. The "My Cycle"
light will indicate activation. Also, the
chosen cycle and option lights will
flicker.
NOTE
You can change the My Cycle settings by
repeating the process above.
The last saved settings will be displayed the
next time you choose the My Cycle function.
_ NOTE
If you press My Cycle and release it within
3 seconds, the previously saved cycle and
options appear. If you press and hold My
Cycle for 3 second or longer, the currently
set cycle and options are saved and the LED
blinks for 3 seconds.
Delay End
You can set the washer to start your wash
automatically at a later time, by choosing a
delay time.
The hour displayed indicates the time at
which the wash will be ended.
1, Set your wash cycle.
2, Press Delay End repeatedly until the
delay time is set.
3, Press Start/Pause. The "Delay End"
indicator will be lit, and the clock will
begin counting down until it reaches the
set time.
4, To cancel a Delay End function, press the
Power button and then turn the washer
on again.
Pre Soak
Use this function when the laundry is
heavily contaminated or stained. This
function improves the wash performance by
adding a Pre Soak cycle.
• If you select this function, the total cycle
time is increased by 1_5minutes.
English 35
WAS000] WA8700J WA52J 031lt3Y I)l ENindd 35 2015/4/20 15:1t3:49