[Audio] Menu - LG UBK80.DUSALLK Owner's Manual

[AUDIO] Menu

Each disc has a variety of audio output options. Set
the player' s Audio options according to the type of
audio system you use.
,
Note
Since many factors affect the type of audio
output, see "Audio Output Specifications" on
page 49 for details.
Digital Output
[Auto]
Select if you connect this unit' s DIGITAL AUDIO
OUT and HDMI OUT jack to a device with LPCM,
Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS and DTS-HD decoder.
[PCM]
Select if you connect this unit' s HDMI OUT
jack to a device with digital decoder or DIGITAL
AUDIO OUT jack to a device with two channel
digital stereo decoder.
[DTS Re-Encode]
Select if you connect this unit' s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with DTS
decoder.
,
Note
y When [Digital Output] option is set to
[Auto], the audio may output as bitstream.
If the Bitstream information is not detected
from HDMI device with EDID, the audio may
output as PCM.
y If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is output for the
other discs (like [Auto]).
y If [Audio Guidance] is set to [On], the audio is
output in PCM without reference to [Digital
Output] option.
Sampling Freq.
(Digital Audio Output)
[48 kHz]
Select this if your A/V Receiver or Amplifier
is not capable of handling 192 kHz and 96
kHz signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
[96 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit
automatically converts any 192 kHz signals to
96 kHz so your system can decode them.
[192 kHz]
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital and
Dolby Digital Plus are operated as same as the
[On] mode.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD audio
output.
[Off]
Turns off this function.
,
Note
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
System Setting 21
3