Honda CBX 750F RC17 Manual page 5

Replace tyres before tread depth at the centre of the tyre reaches the following limit:
Minimum tread depth
Front:
Rear:
Repair
•
Puncture of tubeless tyres may be fixed externally for em ergency. See your authorised Honda Dealer for the correct
method before you encounter actual failure on the road
WARNING:
•
Do not exceed 60 km/h (40 mph) for the first 24 hours after the repair carri ed out, otherwise repair failure or tyre
deflation may result.
•
It is important, after a repair has been carried out to the tyres, to pay special attention when riding at high speed as
the tyre performance may deteriorate.
•
If you wish to have temporarily repair or you have any doubt regarding a repair, please consult HONDA dealers or
your local tubeless tyre specialist.
Replacement
See your authorised Honda Dealer
WARNING:
•
The use of tyres other than those listed on the tyre information label may adversely affect handling.
•
Do not install tube type tyres on tubeless rims. The beads may not seat and the tyres could slip on the rims, causing
the deflation.
•
Proper wheel balance is necessary for safe, stable handling of the motorcycle. Do not remove or change any wheel
balance weights. When wheel balancing is required, see your authorised Honda dealer. Wheel balancing is required
after tyre repair or replacement.
•
Foreign object intrusion of tyre face will reduce the performance of any tyre. Subsequent repair may not restore
original safety factor
CAUTION
•
If the tyre side wall is punctured or damaged, the tyre must be replaced.
•
Do not try to remove tubeless tyres without special tools and rim protectors. You may damage the rim sealing
surface or disfigure the rim.
All manuals and user guides at all-guides.com
1.5 mm (1/16")
2.0 mm (3/32")
5