Asus P3/370A User Manual page 37

PNP OS Installed
Resources Controlled By
Reset Configuration Data
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
3.6.1 PNP OS Installed
This field allows you to use a Plug-and-Play (PnP) operating system.
Please set it as " No " if the operating system has no PnP function
or to avoid reassigning the IRQs by the operating system.
3.6.2 Resources Controlled By
Default setting is "Auto". This setting allows the BIOS to self detect
setting and Plug-and-Play devices during start up. The user can select
and configure IRQs under "Manual" mode.
3.6.3 Reset Configuration Data
In case a conflict occurs after you assign the IRQs or after you configure
your system, you can enable this function to allow your system to
automatically reset your configuration and reassign the IRQs, DMAs,
and I/O address.
3.6.4 IRQ-xx assigned to
If your ISA card is not PnP compatible and requires a special IRQ to
support its function, set the selected IRQ-x assigned to :"Legacy ISA".
This setting informs the PnP BIOS to reserve the selected IRQ for the
installed legacy ISA card.
3.6.5 DMA-x assigned to
: No Used MEM base addr
Used MEM Length
: Manual
: Disabled Assign IRQ For USB
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
ESC : Quit
Item
: PCI/ISA PnP F1 : Help
: PCI/ISA PnP F5 : Old Values
: PCI/ISA PnP F6 : Load BIOS Defaults
: PCI/ISA PnP F7 : Load Setup Defaults
37
:N/A
: 8K
: Enabled
   : Select
PU/PD/+/- : Modify
(Shift) F2 : Color