English Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. Do not use this product near water. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual. Do not defeat the safety purpose of the polarized plug.
45 RPM adapter 3.5mm auxiliary to RCA cable USB cable Power adaptor Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes. Specifications Power AC power adaptor, DC output 12 V 0.5 A...
English Product Description 1. Turntable Platter 10. On/Off-Volume Knob 2. Turntable Spindle 11. Tone Control 3. Turntable Suspension Screw 12. Headphone Jack 4. Tonearm Lever 13. 45 RPM Adapter 5. Tonearm Rest 14. USB Jack 6. Power Indicator 15. Power Jack 7.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Remove the tie-wrap that is holding the tonearm. 3. Rotate the Turntable Suspension Screw clockwise until it is all the way down.
English Turntable Operation 1. Rotate the On/Off Volume Knob to turn on the power. 2. Set the Speed Switch accordingly. 3. Place the record on the turntable. Use the 45 RPM Adapter if necessary. 4. Remove the stylus protector from the stylus assembly. Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned.
Note: Do not use cleanser other that contains alcohol, benzene or any other harsh chemicals, which might damage the paint and finish of the turntable. ** Crosley offers a product line of different cleaning accessories. Please ask your retailer or check out our website www.crosleyradio.com for...
English Troubleshooting There is no power Power adaptor is not connected correctly. No power at the power outlet. To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off.
Page 9
English FCC Statements This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.