Sony SLV-N51 Operating Instructions Manual page 10

Audio/video (A/V) hookup
If your TV has audio/video (AIV) input jacks, you will get a better picture and sound
if you hook up your VCR using these connections. For a true "home theater"
experience, you should connect the audio ou/puts of your VCR or TV to your stereo
sys/em. If your TV doesn't have A/V inputs, see the following pages for antenna or
cable hookups.
If you're not planning to use your VCR to record programs, you're finished setting up
the VCR afier you've made the connections shown on this page. If you want to
record regular or cable TV programs, complele these connections first, and then go to
the following pages for anienna or cable hookups.
[] Use this hookup if your TV has stereo jacks
VCR
LNE LINE
OT I_1
Audio/video cable (not supplied)
TV
Stereo receiver
Audio cable (not supplied)
[] Use this hookup if your TV doesn't have stereo jacks
VCR Stereo receiver
_ _#_ _ TV
Aoo
Video cable (not supplied) Audio cable (not supplied)
Notes
• '11) play a tape in stereo, you must use the A/V connection.
• If you do]l't have a stereo receive]; connect the white LINE OUT/AUDIO L jack to the
AUDIO IN jack on your TV.
10 Hookups