In Regard To All Data Read Mode - Kenwood CD-223M Instruction Manual

Preparation
3D-223M/ DHj3Q
1
n ;Di j
Disc replacement
Discs can be replaced with the same procedure as "Loading discs
in the carousel". In stopped condition, all discs can be exchanged.
However, when the door panel is opened while "DISC DETEC¬
TION" is being displayed, it may not be possible to remove the
disc which had been played. Accordingly, wait for the "DISC
DETECTION" indication to go out before opening the door panel.
When the disc information has been read in at the time of regis¬
tration of disc information like title name, music type, etc., the
disc information can be recalled even when the dis_c insertion
place is changed. [=2Q=J --|J^Lj
Keys and controls used in ;he operations described on this page.
Close the door panel.
In regard to ALL DATA READ mode
ihe disc information for all discs will be read. It is convenient to
'execute this mode before playback after discs have been exchanged.
Close the door panel before operation.
• When a title name has been registered and the door panel is closed,
reading operation Is performed automatically.
The display flashes.
Sequential switching
® MUSIC TYPE
(2)
TITLE INPUT
(3) ALL DATA READ
i— (T)
ALL INFORMATION
• Repeat the above procedure so that the complete disc information is
read into the CD player.
• In the case of a non-CD-TEXT disc, the "DOOTNO CD TEXT" display
will appear for approx. 3 seconds.
To quit ALL DATA READ mode
Press the ■ key.
1. Please remove ail CDs from the carousel before moving the unit.
2. In case of blinking indication of "DISCXXX ERROR", open the door panel, confirm that the error disc has come to the center position, and
then exchange the error disc.