Bosch WAN282B6SN User Manual And Installation Instructions page 39

Table of Contents

Advertisement

Fault
lights up.
flashes.
All other error codes.
"E:30/-20"
The appliance is not
working.
The programme does
not start.
Cause and troubleshooting
Select a suitable programme for draining.
→ "Programmes", Page 23
Door is not closed.
Close the door.
Laundry is caught in the door.
Remove any trapped laundry.
Malfunction
Call the after-sales service.
→ "Customer Service", Page 47
Solenoid valve defective.
Call the after-sales service.
→ "Customer Service", Page 47
Detergent dosage is too high.
Reduce the amount of detergent for the next wash-
ing cycle with the same load.
Additional water is added.
Do not add any extra water to the appliance while it
is operating.
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your kitchen or other
appliances are working.
You have not pressed 
Press
.
Door is not closed.
Close the door.
1.
Press
to start the programme.
2.
Childproof lock is activated.
Deactivate childproof lock.
→ "Deactivating the childproof lock", Page 31
is activated.
Check whether
→ "Buttons", Page 22
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
.
is activated.
Troubleshooting en
39

Advertisement

Table of Contents
loading

Table of Contents