Converge Multipoint Red/Blue - Philips 43P8341 Directions For Use Manual

Picture Menu • The Convergence Control
I
f various images on the entire pic-
ture have red outlines, adjust the
CONVERGE RED control. Then if
any red outlines remain, adjust the
MULTIPOINT RED control.
Likewise, if various images on the
entire picture have blue outlines,
adjust the CONVERGE BLUE con-
trol. Then if any blue outlines remain,
adjust the MULTIPOINT BLUE con-
trol.
Use the UNDO MULTIPOINT control
if you want to restore the picture
screen to the way it was before you
made Multipoint adjustments.
NOTE: After turning the TV set on,
allow it to warm up for 15 minutes
before adjusting the Convergence
controls.
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
Press the CURSOR RING
RIGHT to enter the PICTURE menu.
Press the CURSOR RING
DOWN repeatedly until CONVER-
GENCE is selected.
Press the CURSOR RING
RIGHT to enter the CONVER-
GENCE menu.
Press the CURSOR RING
DOWN repeatedly until MULTI-
POINT RED is selected.
Press the CURSOR RING
RIGHT to enter NAVIGATE mode.
Press the CURSOR RING
LEFT, RIGHT, UP, or DOWN to
move to a cross image that has a color
outline.
Go to step 8 on the next page.
C M
ONVERGE ULTIPOINT
PICTURE
TINT
COLOR TEMP
DNR
IMAGEMAX
CONVERGENCE
TV
SWAP
SOUND
STATUS/
EXIT
VOL
1
4
7
TV/VCR
A/CH
POSITION
R /B
ED
CONVERGE RED
CONVERGE BLUE
PICTURE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
POWER
VCR ACC
PIP CH SOURCE FREEZE
6
DN UP
PICTURE
2
MENU/
SELECT
1
MUTE
CH
2 3
5 6
8 9
0
SURF
PIP
10
LUE
CONVERGENCE
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
PICTURE
CONVERGENCE
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
É
SAVE MULTIPOINT
• NAVIGATE EXIT: ADJUST
NOTE: To display three cross images hidden
by the on-screen text, simply navigate to the
bottom row and the cross images will be
shown.