Philips 43PP7445 - 1 User Manual page 12

Using the Menus: Picture
Using Manual Converge: Converge Red/Blue
You can use the Manual Converge controls to make convergence
adjustments to suit your personal preferences or to further fine-
tune the picture.
Note: Allow the TV to warm up for 20 minutes before adjusting
convergence.
Select MANUAL CONVERGE in the PICTURE menu.
Press the cursor down and select either CONVERGE RED or
CONVERGE BLUE.
Note: If various images in the picture have red outlines, select
CONVERGE RED. If various images in the picture have blue
outlines, select CONVERGE BLUE.
Use the cursor right, left, up or down to adjust the cross hair
until the colour outline is gone. The adjustment is automatically
saved in the TV's memory when you exit the adjust mode.
Press the MENU key to return or the OSD key to switch the
menu off.
Check the TV picture. If any colour outlines remain around
the images, use the MULTIPOINT RED (for red outlines) or
MULTIPOINT BLUE (for blue outlines) control. See the next
section for instructions for using those controls.
43.50PP7445_DFU_Eng_69.indd 12
12
2005-01-20 10:09:56 AM