JVC LT-43C795A Instruction Manual page 21

3. Highlight PICTURE then press the OK button.
• Press the buttons to adjust the levels in the menus.
Mode
Your TV has some pre-set picture modes: Dynamic - Natural - Cinema - Game. The default setting
is Standard. You can also manually adjust each mode.
Contrast
Adjusts the difference between light and dark levels in the picture.
Brightness
Increases or decreases the picture brightness.
Sharpness
Adjusts the level of crispness in the edges between light and dark areas of the picture.
Colour
Controls the colour intensity.
Energy Saving
The energy saving mode can be adjusted from Custom - OFF - Minimum - Medium - Maximum
- Auto - Screen Off. Adjusting this setting will reduce the brightness and power consumption of
your TV or turn the screen off altogether.
Backlight Adjusts the backlight setting. Only available when Custom Energy Saving is selected above.
Advanced Select to have more advanced adjustments to your TVs picture.
Picture Settings
Dynamic
Contrast
Noise
Reduction
Colour
Temp
Picture
Zoom
Film Mode Film mode can be switched to AUTO
Skin Tone Adjusts the skin tone from -5 to 5.
Colour
Shift
4. Press the BACK button to return to the previous menu.
5. Press the EXIT button to exit the menu.
JVC 43' LED Smart HD TV with built-in DVD player LT-43C795(A) Manual.indd 21
Adjusts the contrast to pre-set levels.
OFF - LOW - MEDIUM -HIGH
Reduces the noise level of the
connected device: Off / Low / Middle
/ High.
Adjusts the colour temperature.
NORMAL - WARM - COOL
Adjusts the aspect ration of the
picture. AUTO - 16:9 - SUBTITLE - 14:9
- 14:9 Zoom - 4:3 - CINEMA.
or OFF. Auto mode will adjust the
frame rate to produce the clearest
motion.
Select to adjust the picture colour
between Red and Green.
Customising TV Settings
4
21
14/11/2019 10:13