Philips 42PFL9632D User Manual page 30

2671.2 aus AL 09-10-2007
Ò The update process starts automatically. Please
wait.
U S B
The update is finished when the message
'Operation successful' appears on the screen.
U S B
† Remove the USB memory device from the TV.
U S B
º Press B on the remote control.
B
rNote
Do not press more than once and do not use the
Power B switch on the TV.
30
10:40 Pagina 30
Pr g
Operation Successful! Re
B
INPUT
v
j MHEG q
b
CANCEL
DEMO
GUIDE
a a
OPTION
◊The TV switches off.The screen stays black for
about 10 seconds. Please, wait.
‹The TV switches back on again.The update is
done.
5.12.4 Verify the current software
version
Updating software is only possible if the version of
the new available software is different from the
current one.You can verify your current software
version.
‡ Select Software update in the TV menu.
® Press navigation key right.
Ò Press navigation key up or down to select
Current software info.
The version and the description of the current
software appears.
5.12.5 Software update by digital
broadcast (DVB-T)
Your TV might receive new software from the
digital broadcast system automatically.
If you receive an update message on screen it is
strongly advised to update the software
immediately - select Now.
Select Later, if you want to be reminded later on.
Select Cancel to quit the update (not
recommended). If you cancelled the update you can
still update yourself from the TV menu > Software
update > Local update.
Use more of your TV