Audio Adjust - Panasonic TC-20LA2 Operating Instructions Manual

Menu Operations
AUDIO ADJUST
1
2
Press to select AUDIO ADJUST.
Press to display the AUDIO ADJUST
screen.
Press to select the sub-menu.
Select the setting listening to the
sound.
Press to activate the setting if
necessary
NORMAL/NORMALIZE
Select "NORMALIZE" and press 'OK" button to return each MODE to the factory default setting.
Notes:
o 'NORMAL" means the MODE is in the factory default setting. "NORMAL" changes to "NORMALIZE"
when you change the setting of BASS or TREBLE.
oYou can normalize each MODE separately.
MODE
MODE Function
DYNAMIC Gives contrast to sound.
MUSIC For programs consisting mainly of music. Enhances high sounds (around 4 kHz).
AUTO Automatically adjusts for a wide Dynamic Range.
STANDARD Emits the original sound,
You can change the level of each sub-menu (BASS and TREBLE) for each MODE (AUTO, STANDARD,
DYNAMIC and MUSIC) according to your personal preference
Sub-menu Function 1
BASS Adjusts low frequencies.
TREBLE Adjusts high frequencies.
STEREO/SAP/MONO
Note:
o Red display : With signal
White display : No signal
White display (All modes) : MONO
oTo change the mode using SAP
button (see page 13),
MODE Function
STEREO Two channel audio reception.
SAP Second Audio Programming
(typically used for bilingual audio).
MONO Select when stereo signal is weak,
25