Advertisement
Quick Links
Description:
Sentry Sprinklers Model SY8051 is an Automatic Standard
Response Concealed Pendent Sprinkler head that utilizes
a frangible thermo-sensitive glass bulb to operate the
sprinkler. The sprinkler is available in various finishes and
temperatures. Sprinkler Model SY8051 is listed and approved
for standard coverage for Light and Ordinary hazards.
Model SY8051 is a 5.6 K-Factor (80 metric) intended for
use in fire sprinkler systems designed in accordance with
the standard installation rules recognized by the applicable
listings or approved agency.
Assembly includes a Cover Plate Assembly that covers the
operating components above the ceiling. The Cover Plate
Assembly is mounted to the Sprinkler Cup Assembly. Upon
the release of the Cover Plate, the Concealed Pendent
Sprinkler produces a hemispherical water distribution
pattern below the deflector.
Technical Data:
Minimum Operating Pressure:
Maximum working Pressure:
Factory Test:
Nominal K-Factor:
Thread Size:
Bulb size:
Operation:
Upon fire initiation within a protected hazard, the temperature inside the hazard rises fusing the solder
between the cover plate and its assembly. A spring on the Sprinkler Cover Plate Assembly ensures
the ejection of the cover plate from its assembly. The rising heat causes the liquid inside the Thermo-
Sensitive bulb to expand. The liquid expansion causes the glass bulb to break, releasing the bulb seat
assembly. The water discharges through the sprinkler orifice striking the deflector producing a uniform
distribution pattern within the hazard area.
10967 Lake Underhill Rd, Unit 103 Orlando, Florida 32825 Tel:+1-407-482-9282 Fax:+1-407-482-9476
Standard Coverage, Standard Response Concealed Pendent
The Concealed Sprinkler
7 psi (0.5 bar)
175 PSI (12 bar)
100% @ 500 psi (34.5 bar) Hydrostatically
5.6 (80 metric)
1/2" NPT
5mm
www.SentrySprinklers.com
Model SY8051
Sprinkler, K-factor 5.6 (80 metric)
Model SY8051
Page 1/4
Advertisement
Related Manuals for Sentry SY8051
Summary of Contents for Sentry SY8051
- Page 1 Sprinkler Model SY8051 is listed and approved for standard coverage for Light and Ordinary hazards. Model SY8051 is a 5.6 K-Factor (80 metric) intended for use in fire sprinkler systems designed in accordance with the standard installation rules recognized by the applicable listings or approved agency.
- Page 2 All sprinkler heads must be inspected prior to installation. If a sprinkler is damaged, the bulb is cracked, the bulb has loss of liquid and or lost its protective cap, do not install the sprinkler and contact Sentry Sprinklers for replacement. With the sprinkler held in the horizontal orientation, a small air bubble should be present inside the glass bulb.
- Page 3 Standard Coverage, Standard Response Concealed Pendent Sprinkler, K-factor 5.6 (80 metric) Use Sentry Sprinklers recommended wrench to install the sprinkler. Slide the sprinkler wrench around the sprinkler frame arms and press the wrench down to engage sprinkler wrench flats. Rotate the wrench clockwise to tighten the sprinkler head.
- Page 4 Model SY8051 Standard Coverage, Standard Response Concealed Pendent Sprinkler, K-factor 5.6 (80 metric) If a sprinkler must be removed for any reason, do not reinstall it or a replacement without reinstalling the Cover Plate Assembly. If a Cover Plate Assembly becomes dislodged during service, replace it immediately.