ECS DURATHON 2 B150M-P73 User Manual page 58

Power Limit 1 Override (Disabled)
Use this item to enable or disable the Power Limit 1 Override. If this option is
disabled, BIOS will program the default values for Power Limit 1.
Power Limit 1 (0)
Power limit 1 in Milli Watts and stepsize is 125mW .XE SKU: Any value can be
programmed. Overclocking SKU: Value must be between Max and Min Power Limits
(specified by PACKAGE_POWER_SKU_MSR). Other SKUs: This value must be between
Min Power Limit and TDP Limit. If value is 0, BIOS will program TDP value.
Power Limit 1 Window (0)
Power limit 1 Time Window value in seconds. The value may vary from 0 to 128. If the
value is 0, default values will be programmed (28 sec for Mobile and 1 sec for
Desktop). Indicates the time window over which TDP value should be maintained.
Power Limit 2 Override (Enabled)
Use this item to enable or disable the Power Limit 2 Override. If this option is
disabled, BIOS will program the default values for Power Limit 2.
Power Limit 2 (0)
Power limit 2 value in Milli Watts and stepsize is 125mW. If the value is 0, BIOS will
program this value as 1.25*TDP. Processor applies control policies such that the
package power does not exceed this limit.
Realtime CPU Ratio (20)
This item allows you to set the CPU Ratio Override.
Performance Mode (Boost)
Use this item to select the performance state that the BIOS will set before OS handoff.
TDP Lock (Disabled)
This item allows you to enable or disable the Package TDP lock.
1 /2 /3 /4-Core Ratio Limit Override (0)
These items are for 1 /2 /3 /4 cores active. 0 means using the factory-configured
value.
Press <Esc> to return to the Tweak Menu page.
B150M-P73 USER MANUAL
53