Table of Contents
Advertisement
length.
While recording, press O and release it
immediately.
§
to a switched outtet
=
—
to a wall outlet
mtr ennrerrerrraienn
The REC indicator starts flashing. During this
time, no incoming signals are recorded on the
tape.
After four seconds, the 89 indicator lights up and
For playback
Follow steps 1 through 3 on page
the unit enters recording pause mode.
7.
For recording Follow steps 1 through 7 on page
2 Press If to resume recording.
10.
After completing the preparations, press i to
change the unit to stop mode.
Make sure to close the holder completely.
1 Prepare the unit for playback or recording.
2 Set the timer to the desired time.
Power to the tape deck will be cut off.
3 Set TIMER to PLAY or REC.
When the timer-activated operation is completed
Set the TIMER switch on the unit to OFF. If the TIMER
switch is left at REC, the unit will automatically start
recording the next time the power is turned on, and the
previously recorded material may be erased.
Advertisement
Table of Contents
