Panasonic TC-19LX50 Operating Instructions Manual page 23

Press the MENU button to dispHaythe MENU screen and seHectADJUST,
Press to seHectAUDIO ADJUST,
Press to dispHaythe AUDIO ADJUST
screen,
f
Press to seHect the sub-menu,
SeHect the setting while Hstening to the
sound,
Press to activate the setting if necessary,
NORMAL / NORMALIZE
SeHect"NORMALIZE" and press "OK" to return each MODE to the factory default
setting,
Notes:
, "NORMAL" means the MODE is at the factory defauHt setting, "NORMAL"
changes to "NORMALIZE" when you change the setting of BASS, TREBLE,
BALANCE, AI SOUND, SURROUND or AUDIO LEVELER,
, You can normalize each MODE separateHy,
MODE
STANDARD Emits the originaH sound_
DYNAMIC Gives contrast to sound,
SPEECH Make voice sound dear,
BASS, TREBLE, BALANCE, Am SOUND,
SURROUND
You can change the HeveH of each sub-menu (BASS,
TREBLE, BALANCE, AI SOUND, SURROUND) for
each MODE (STANDARD, DYNAMIC and SPEECH)
according to your personal preference,
BASS Adjusts low frequencies,
TREBLE Adjusts high frequencies,
BALANCE Adjusts left and right volume,
Automatically adjusts sound
AmSOUND quality when ON is selected,
SURROUND To enjoy a concert hall effect,
select ON when stereo is playing,
STEREO / SAP / MONO
, Red display : With signal
White display : No signal
White display (All modes) : MONO
, To change the mode using SAP button (see page 11),
STEREO Two channel Audio reception,
Second Audio Programming
SAP ( typically used for bilingual audio ),
MONO Select when stereo signal is weak,
AUDIO LEVELER
You can adjust the volume level for each of the input modes (TV, VIDEO1, VIDEO2 and COMPONENT),
23