Advertisement
portable positioning in stage monitor use, or wall or ceil-
ing mounting for permanent installations.
A112D Wall Mount Swivel Bracket provides up to 50"
of downward tilt, and up to f 60" of horizontal rotation
when mounted on a vertical surface.
A112C Slip-On Cover is a heavy vinyl cover that pro-
vides protection for the Speaker. Has a handle cut-out
for the SRl16B Speaker.
A102A 70-Volt Transformer provides wattage taps of
50, 25, 12, and 6 watts for 70-volt distributed systems, and
impedance taps of 8 to 16 ohms. Mounts easily to the
back of a speaker or convenient surface.
GUARANTEE
This Shure product is guaranteed in normal use to be
free from electrical and mechanical defects for a period
of one year from date of purchase. Please retain proof of
purchase date. This guarantee includes all parts and
labor. This guarantee is in lieu of any and all other guar-
antees or warranties, express or implied, and there shall
be no recovery for any consequential or incidental
damages.
SHIPPING INSTRUCTIONS
Carefully repack the unit and return it prepaid to:
Shure Brothers Incorporated
Attention:
Service Department
1501 West Shure Drive
Arlington Heights, Illinois 60004
If outside the United States, return the unit to your
dealer or Authorized Shure Service Center for repair.
The unit will be returned to you prepaid.
ARCHITECTS' AND ENGINEERS'
SPECIFICATIONS
SR112B Speaker
The Speaker shall be a speaker designed for indoor or
outdoor use in sound reinforcement or studio monitor ap-
plications. The Speaker shall utilize two &inch cone-type
speakers and one high-frequency driver. The Speaker
shall have an EIA sensitivity rating of 48 dB at 9.2m
(30 feet) from 1 milliwatt (equivalent to 97 dB at l m -
3.3 feet-with
a 1-watt input).
The sound pressure distribution shall be nominally uni-
form over a 120" angle in the horizontal plane and a 90"
angle in the vertical plane.
The usable frequency response of the Speaker shall be
uniform and peak-free from 45 Hz to 16,000 Hz.
Nominal impedance of the Speaker shall be 8 ohms
and it shall be designed to operate with amplifiers deliv-
ering up to 100 watts to an &ohm load.
The speakers shall be wired with a 2600 Hz crossover
network in a series-parallel configuration and connected
to a two-terminal barrier terminal strip.
The speaker enclosure shall be 15.9 mm (Ti in.) wood
construction covered with black, scuff-resistant vinyl and
a removable, sculpture fabric grille. Molded feet pro-
tect surfaces and permit stacking. All surfaces (inter-
nal and external) and all components shall be treated for
weather resistance. The Speaker shall measure 400 mm in
height, 584 mm in width, and 381 mm in depth (15% in.
x 23 in. x 15 in.). The weight shall be 16.75 kg (37 Ib.).
The operating temperature range of the Speaker shall be
-7°C to 43°C (20°F to 110°F). The storage temperature
range shall be -29°C to 71°C (-20°F to 160°F). The
Speaker shall meet all specifications when operating
within the operating temperature limits.
Any Speaker not meeting all the above specifications,
or having a sealed cabinet which prevents internal in-
spection and servicing, shall be deemed unacceptable
under this specification. The Speaker shall be a Shure
Model SR112B.
SR116B Speaker
The Speaker shall be a portable speaker designed for
sound reinforcement or studio monitor applications. The
Speaker shall utilize two 8-inch cone-type speakers and
one high-frequency driver. The Speaker shall have an
EIA sensitivity rating of 48 dB at 9.2m (30 feet) from 1
milliwatt (equivalent to 97 dB at lm-3.3
feet-with
a
1-watt input).
The sound pressure distribution shall be nominally
uniform over a 120" angle in the horizontal plane and 90"
angle in the vertical plane.
The usable frequency response of the Speaker shall be
uniform and peak-free from 45 Hz to 16,000 Hz.
Nominal impedance of the Speaker shall be 8 ohms and
it shall be designed to operate with amplifiers delivering
up to 100 watts to an 8-ohm load.
The speakers shall be wired with a 2600 Hz crossover
network in a series-parallel configuration and connected
to two phone jacks.
The speaker enclosure shall be 15.9 mm
(Ye
in.) wood
construction covered with black, scuff-resistant vinyl
and a removable, sculptured fabric grille. Molded feet
protect surfaces and permit stacking. The enclosure
shall have a retractile handle for portability. A plug-in 15m
(50 ft) speaker cable shall be supplied. The Speaker shall
measure 400 mm in height, 584 mm in width, and 381 mm
in depth (15% in. x 23 in. x 15 in.). The weight, less
supplied cable and grille cover, shall be 17.21 kg (38 Ib.).
The operating temperature range of the Speaker shall be
-7°C to 43°C (20°F to 110°F). The storage temperature
range shall be -29°C to 71°C (-20°F to 160°F). The
Speaker shall meet all specifications when operated with-
in the operating temperature limits.
Any Speaker not meeting all of the above specifica-
tions, or having a sealed cabinet which prevents internal
inspection and servicing, shall be deemed unacceptable
under this specification. The Speaker shall be a Shure
Model SR116B.
Advertisement
