Screen Position Adjustment; Connecting The Power Cord - Acer AL502ug User Manual

4 User's Guide

SCREEN POSITION ADJUSTMENT

In oder to optimize the best viewing position, you can adjust the tilt of the monitor by
using both of your hands to hold the edges of the monitor as shown in the figure below.
The monitor can be adjusted to 30 degrees up or 5 degrees down as indicated by arrow
below.

CONNECTING THE POWER CORD

Check first to make sure that the power cord you use is the correct type required for
·
your area.
This monitor has a universal power supply that allows operation in either 100/120V
·
AC or 220/240 V AC voltage area. No user-adjustment is required.
Plug one end of the power cord to the power connector, plug another end to a proper
·
AC outlet.
For unit using at 120 V AC:
·
Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.
For unit using at 220/240 V AC (outside of U.S.):
·
Use a Cord Set consisting of H05VV-F cord and plug rated 16 A, 250 V. The cord set
should have the appropriate safety approvals for the country in which the equipment
will be installed.