Disassemble Ballast Module & Back Ir - Acer PD113 Service Manual

Disassemble Ballast Module & Back IR
1. Loosen the screw of Back IR board.
2. Remove the Back IR board
3. Loosen the six screws of Ballast Module
4. Unplug all wires on Ballast Module (Ballast Board PIN location of connectors pls refer
to Chapter 5 )
5. Remove the Ballast Module.
01635-361 *2
Unplug from Power Module 2 Pin Connector
19
01635-366 *4
Unplug from Lamp Module Connector
01635-A44-N
P1647-5001
P2084-0005
Chapt er 3