Temperature Selection; Spin Speed Selection - Beko B3WT5941WS User Manual

• Soft Toys
Soft toys must be washed in a delicate pro-
gramme due to their delicate fabrics, and the
fibre and accessories they contain. Thanks
to its delicate washing movements and spin-
ning profile, the soft toys programme pro-
tects the toys during washing. It is recom-
mended to use liquid detergent.
Fragile toys with hard surfaces must
not be washed under any circum-
stances.
Toys must not be washed together
with your garments since they may
harm laundry.
• Towel
Use this programme to wash durable cotton
laundry such as towels. Load the towels into
the machine paying attention to place them
in a way that they will not contact the door
gasket or the glass.

6.6 Temperature Selection

Whenever a new programme is selected, the
recommended temperature for the pro-
gramme appears on the temperature indic-
ator. It is possible that the recommended
temperature value is not the maximum tem-
perature that can be selected for the current
programme.
Press the Temperature Adjustment button to
change the temperature. Temperature de-
creases gradually.
No change can be made in pro-
grammes where temperature adjust-
ment is not allowed.
You can also change the temperature after
the washing starts. This change can only be
made if the washing steps allow it.
If you scroll to cold wash option and
press Temperature Adjustment but-
ton again, the recommended max-
imum temperature for the selected
programme appears on the display.
Press the Temperature Adjustment
button again to decrease the tem-
perature.

6.7 Spin Speed Selection

Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the Spin Speed
indicator. It is possible that the recommen-
ded spin speed value is not the maximum
spin speed that can be selected for the cur-
rent programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed de-
creases gradually.
Then, depending on the model of the
product, "Rinse Hold
" options appear on the display.
If you are not going to unload your laundry
immediately after the programme completes,
you can use Rinse Hold function in order to
prevent them from getting wrinkled when
there is no water in the machine.
This function holds the laundry in the final
rinsing water. If you want to spin your laun-
dry after the Rinse Hold function:
a. Adjust the Spin Speed.
b. Press Start / Pause. The programme will
resume. Machine drains the water and
spins the laundry.
If you want to drain the water at the end of
the programme without spinning, use No
Spin function.
EN / 27
" and "No Spin