Table of Contents
Advertisement
5. Connect the speaker's audio cable and audio jack of monitor to transfer audio source
6. Insert the power cord into the monitor, then plug the monitor power cord and the
1-7 R27i-30 Flat Panel Monitor User's Guide
from HDMI/DP.
Note: The audio output in HDMI/DP modoes.
computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified
power supply cord not lighter than ordinary polyvinyl chloride flexible cord according
to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2 )
shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245
(designation H05RR-F 3G 0.75mm2 ) shall be used.
Advertisement
Table of Contents
