Pioneer CT-1270WR Operating Instructions Manual

Waster.
STEREO
DOUBLE CASSETTE TAPE DECK
CT-1270WR
Operating
Instructions
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
inished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the ex-
planatory drawings. However, the method of connecting and
operating the unit is the same.
xh
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage modets are provided with this
switch. U.S., Canadian, European, U.K., and Australian
models are not provided with this switch.
The line voltage selector switch is on the rear panel. Before
your model is shipped from the factory, this switch is set to
WARNING: to prevent FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep in a secure area. This is for your security.
the power requirements of the destination. Check that it is set
properly before plugging the power cord into the AC outlet. if
the voltage is not properly set or if you move to an area where
the voltage requirements differ, adjust the selector switch as
follows.
1. Disconnect the power cord.
2. Use a medium-size screwdriver.
3. Insert the screwdriver into the groove on the voltage selec-
tor, and adjust so that the tip of the arrow points to the
voltage value of your area. =,
Medium-size screwdriver
"This product is manufactured 'to comply with the radio ine
terference requirements of EEC Directive 76/889/EEC and
82/499/ EEC."
QMPIONEER'