Table of Contents
Advertisement
CONNECTIONS
AC Adaptor BOSS
PSA-120, 220 or 240.
(Optional)
Video Cassette Recoce'
Gutar
_
Lo
perme He ane
CO Player
Elecine Keyboard
tre
e e
|
To AC
&
Adaptor Jack
To other
Micro Studio
Series
Ves
Disc Player
Footswitch
FS-1
(Optional)
To another RCL-10
(in stereo setup)
trod
Pre Mar dmc ter
Gatar Amo he
|
Tape Recade
"Example Settings"
(page 9, 10 and 13)
All the BOSS Micro
Studio Series show
the current draw here.
* Featuring Low Noise, RCL-10 can also have place in
AV system for creating special sound effect.
OPERATION
*
Set the Ratio Knob to 1:1 (center) position, the
Threshold
of Noise
Gate to MIN,
the Output
Level to "0dB", and the Effect Switch to the
OFF position.
Switch
the RCL-10
on. (Make
sure
that the
Power Indicator lights up.)
Set the Level Switch to either position
depending on the type of the device you
use.
Changing
the
position
of
the
Level
Switch will not affect the volume.
Push the Effect Switch to turn the unit to the
effect mode.
When
you connect
a footswitch to the Effect
Remote Jack, you can turn the unit to the effect
or normal mode just by depressing the pedal.
If the Effect Switch on the front panel has been
turned off, above remote control function cannot
be obtained.
Try moving each Control to see how it affects
the tone color, then make your own sounds.
Advertisement
Table of Contents
