Table of Contents
Advertisement
Delete button
• touch the image frame to select it or touch "ALL" button to
select all the stored images;
• once selected, the image frame turns green;
• confirm your choice with "Confirm" icon
"Cancel" icon
to exit without saving.
Add button
• Insert the USB Flash drive with the new images in the USB
port (F.4.1 USB port).
Touch the "Add" button on the "edit recipe Image" display.
• Wait until the display shows the end of the operation.
G.4.7
Recipe Passcode
Touch the "Recipe Passcode" button to set a passcode to enter
into "Recipe Setting" Menu.
Recipe Passcode
Select "YES" to activate this function and insert the passcode:
• min 1 character;
• max 6 characters.
IMPORTANT
Do not start the passcode with "0".
Recipe
passcode?
Passcode:
confirm your choice with "Confirm" icon
icon
to exit without saving.
G.4.8
Appliance Passcode
Touch the "Appliance Passcode" button to set a passcode to
enter into "Appliance Menu".
Appliance Passcode
• Select "YES" to enable this function;
• insert the passcode;
– min 1 character;
– max 6 characters.
IMPORTANT
Do not start the passcode with "0".
Appliance
passcode?
Passcode:
confirm your choice with "Confirm" icon
icon
to exit without saving.
G.4.9
Demo Mode
Touch the "Demo Mode" button to enable this function.
Touch this button again to disable it.
or touch
Yes
Yes
1234
or touch "Cancel"
Yes
Yes
1234
or touch "Cancel"
Demo Mode Yes
When "Demo mode" is activated, standard appliance use
(settings, cooking cycle, etc.) can be simulated, but heating
elements and fans are turned off.
CAUTION
In "Demo Mode" appliance setting can be
change or reset (included passcode, rec-
ipes, counters).
G.4.10 Restore Factory Default
Touch the "Restore Factory Default" button to restore factory
settings.
IMPORTANT
Only specialised personnel can execute this
operation.
Wrong steps can compromise the proper function-
ing of the appliance.
NOTE!
For detailed information refer to Service Manual.
G.4.11 Update Firmware
Touch the "Update Firmware" button to update appliance
firmware.
IMPORTANT
Only specialised personnel can execute this
operation.
Wrong steps can compromise the proper function-
ing of the appliance.
NOTE!
For detailed information refer to Service Manual.
G.4.12 Backlight Dim Time
Touch the "Backlight Dim Time" button to set the display
backlight dimming time (i. e., after how many minutes the
display reduces its brightness).
Backlight Dim
Time
Screen Dim Time
00:30:00
Range: 00:00:00 - 02:00:00
Insert the requested value.
Confirm your choice with "Confirm" icon
icon
to exit without saving.
G.4.13 Show Recipe Details
Touch the "Show Recipe Details" button to enable or disable
the possibility to visualize and eventually modified recipe's
details at the beginning of a cooking cycle.
Show Recipe Deatail
Details that can be visualised are:
• total time;
• cooking temperature;
00:30:00
1
2
3
4
5
6
7
8
9
0
or touch "Cancel"
Yes
23
Advertisement
Table of Contents
