Honda WW150 2018 Owner's Manual page 43

Press the alarm button to select from 3
g
sensitivity level of anti-theft alarm system.
3 times of alarm rings: high sensitivity
2 times of alarm rings: middle sensitivity
1 time of alarm rings: low sensitivity
The Honda SMART Key indicator and
ignition switch ring come on while setting.
Wait for about 10 seconds until the ignition
h
switch ring starts blinking. The sensitivity
level is set.
Remove the EM mode coupler from the EM
i
mode connector to finish setting.
The sensitivity level is also set if you
u
remove the EM mode coupler before the
ignition switch ring starts blinking.
Store the EM mode coupler in the tool kit.
j
Reinstall the parts in reverse order.
#
If the Anti-Theft Alarm System Does
Not Operate Properly
If any of the following situations arise, battery
( ) in the scooter is discharged or
(P.76)
there is a system problem. Remove the
battery and see your dealer.
The alarm does not ring.
●
The alarm rings but fades out.
●
The alarm system does not stop.
●
39