Care And Cleaning; Guarantee And Product Registration; Service Information; Specifications - Quad Electroacoustics QUAD II Classic Integrated Owner's Manual

CARE AND CLEANING
The sur&ce of the equipment may be cleaned with a damp doth provided that the
power haa been removed first. Solvent based cleaning materials should never be used
as they may damage the paint finish.
GUARANTEE AND PRODUCT REGISTRATION
Youi QUAD equipment is guaranteed against any defect in material and workmanship for
a period of one year from the date of purchase with the exception of the valves, which are
warranted for three months. Proof of purchase is required for warranty daims.
Please complete and return the endosed Warranty r^stradon form. Within the warranty
period QUAD will undertake replacement of defocdve parts free of charge provided that
the failure was not caused by misuse, accident ot n^igence. Your statutory rights within
the territory in which you purchased the equipment are not affoaed by this warranty.
QUAD carries out a regular review of its products and reserves the ri^l to adjust the
specifications and performance (iom time to time.
SERVICE INFORMATION
If your QUAD equipment requires servidng (induding valve replacement) you should
If you are abroad and there is no suitable dealer in your area, please contact the
distributor for the country in which it was purchased or QUAD Qectroacousdcs Ltd.
It is user's responsibili^, whether the equipment is under warrant or otherwise, to
ensure that equipment for service is returned carris^e paid and in the original
packaging. You should endose a brief note with your
name
and address and the reason
for returning the equipment.
International Service Centres
UK: International Audio Group Service Centre, Unit 4. St Maigarets Way, Stukeley
Meadows Industrial Estate Huntingdon, Cambs, PE29 6EB
Tel:+44 (0)1480 447700 Fax: +44 (0)1480 431767
For information on authorised service centres worldwide contaa QUAD
Electroacoustics Ltd. A worldwide distributor list Is available at tiwto.quad-h0.co.tik
SPECIFICATIONS
Valves:
Input Sensitivity:
Output Power:
THD:
Hum and Noise:
Frequency Response:
Crosstalk:
Voltage Gain;
Power Consumption:
Dimeusion (H x W x D:)
4xKT66: 4xl2AX7: 2x6922EH
275mV RMS (Line Level & Tape Monitor)
2mVRMS(MM)
200pV RMS (MC)
25W per Channd into 8 Ohms
0.06%@ 15W(700H2)
Better than -98dBA (ref 25W into 80)
20Hz-20KHz (+0dB/-ldB)
>75dB
34dB
195 W (max)
200 x 310 x 380 mm.
Note; Design and specifications are subject to change without notice for improvements.
10