Table of Contents
Advertisement
6 TWS pairing
TWS: Paring for stereo
sound
Two speakers can pair with each other for stereo
sound.
Note
•
TWS works only when there are two identical
party speakers (Philips TAX2208).
Pair two TAX2208
speakers via TWS
1 Select one speaker as the master speaker and
connect it to the Bluetooth device.
2 Long press the
button on the master speaker
until a prompt tone is heard.
3 Then long press the
speaker until a prompt tone is heard.
4
TWS is connected and the backlight of the
button lights up on both speakers.
To exit TWS, long press the
the speakers until the prompt tone is heard and
the
backlight is off.
TWS playback control
When TWS is connected, the synchronization
of
control from the master speaker to the slave
speaker is as below, vice versa:
Control on master
speaker
Party speaker volume
Play/Pause
Previous track
Next track
Light mode
DBB
Mic volume
Echo
Power on/off
8
EN
button on the slave
button on either of
Synchronize to slave
speaker
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Play audio
7
through
Audio in
Listen to an external
device
With this product, you can listen to an external
audio device such as an MP3 player.
Play from an MP3 player
1 Press and hold
button to switch on the
party speaker and then you will hear a
prompt tone.
2 Connect an audio input cable (not supplied)
with a 3.5mm connector on both ends to:
The Audio in jack on the product.
The headphone jack on the MP3 player.
3 The blue backlight
and the party speaker will be automatically
switched to Audio in source.
4 Play audio on the MP3 player (refer to its
user manual).
Audio in
Note
You need to re-insert the audio input cable
into the Audio in jack if you want to switch back
to Audio in from the other sources.
button will go off
Advertisement
Table of Contents
