Using The Noise Controls Mode - Samsung Galaxy FE Buds2 User Manual

Using the earbuds
If you select the volume adjustment feature as one side's touch-and-hold
•
feature, the other side's touch-and-hold feature is also automatically set to the
volume adjustment feature.
When the volume adjustment feature has been already selected and you try to
•
change the one side's touch-and-hold feature, the other side's touch-and-hold
feature is automatically set to turn on the noise controls mode.

Using the noise controls mode

Introduction
There are two noise controls mode: active noise cancelling and ambient sound mode.
Turn on the active noise cancelling feature to reduce the volume of sounds around
you. Use it when you want to avoid distractions, such as when listening to music.
Conversely, turn on the ambient sound mode to hear your surroundings clearly, so you
can detect any potentially dangerous situations or hear another person's voice during a
conversation.
If the microphone (the outer microphone while wearing the earbuds) and its area
are covered completely, feedback may occur when activating the noise controls
mode.
You can only turn on the noise controls mode when wearing both earbuds in your
ears.
Activating the noise controls mode
Activating from the earbuds
Make sure that the touch-and-hold feature is set to Switch noise controls and then
touch and hold the earbud.
The following noise controls mode will be launched: active noise cancelling and ambient
sound mode.
If the touch-and-hold feature is set to Switch noise controls and includes an option
with Off, the noise controls mode may turn off. Tap
to check the option you selected.
next to Switch noise controls
23