Using The Tape Deck - Pioneer KE-2424 Owner's Manual

Using the Tape Deck
st forward/rawiad,
Sah
Baiance
Tone 7 iKE- 2424)
1. Turning the power switch to the right causes power to switch
ON.
2. Loading a cassette tane inte the load slot causes playback to be-
automatically.
3. Adjust the volume and balance.
4. Adjust the tone,
KE-2424
5. When tape playback reaches the end of the tape, playback will
automat y switch from the side being played to the opposite
side (ié. Side A to Side 8 or vice versaj (Auto-reverse). To step
& tape during playback, press the eject butten.
al!
KE-1414
5. When playback reaches the end of the tape, the
matically stop (Auto-stop}. Press the eject button
go ta stop the tape during playback.
@ A loose or warped label on a cassette lape may interfere with
ism Gf the unit or cause the cassette to become lammed in th
such tapes ar remove such labels from the cassette be
® fe sure to ie @ tape when wie vehicie's ignition is
tape in the unitcan deform the pinch roiler causing wow and
Playback
® Loose tapes wound with the aki of a per
tapes rew se of the fast forward function,
@ Fast Forward/Rewind (KE-2424)
Since the transport can be in either direction, both th
high-speed tape transport buttons can be regarded a
rewind buttons.
For fast forward, press the high-speed tape transp
corresponds to the direction that is shown by the d
tor. When the end of the tape is reached, playback w
ly begin from the opposite side of the tape (Auto-rei
For rewind. press the button that is opposite that «
showr by the direction indicator. When the end
reached, playback will automatically begin from th
the same side of the tape (Auto-replay).
Fast forward and rewind can be terminated by press
tive opposite high-speed tape transport button.
E
wid
wit the
a ari