Sony STR-DE425 Operating Instructions Manual page 10

10
Receiver Operations
Changing the factory setting of a =
function button
If the factory settings of the FUNCTION buttons
(page 9) don't match your system components, you can
change them. For example, if you have two CD players
and you don't have a tape deck or an MD recorder,
you can assign the TAPE/MD button to your second
CD player.
Note that the settings of the TUNER and PHONO
buttons cannot be changed.
SYSTEM
CONTROL/
FUNCTION
Numeric buttons
1 Hold down the SYSTEM CONTROL/FUNCTION
button whose function you want to change
(TAPE/MD, for example).
2 Press the corresponding numeric button of the
component you want to assign to the SYSTEM
CONTROL/FUNCTION button (1 - CD player,
for example).
The numeric buttons are assigned te select the
functions as follows:
sa
Numeric button Operates
1 CD lage
via DAT deck
3 MD deck -
4 - Tape deck A
sy - Sepeaees _
6 / LD layer =
VCR (remote control mode VTR 1*)
"I
8 - VCR (remote control ede VIR 2)
—_ 9 - : VER ean control mode VTR 34)
be - TV - -
S10 OBS
ei Enter "pv D 7 : ; ;
if Sony VCRs are operated with a WTR 1, 2 or 3 setting.
These correspond to Beta, 8mm and VHS respectively.
Now vou can use the TAPE/MD button to control
a second CD plaver.
To reset the setting to the factory setting
Repeat the above procedure.