Sony TRINITRON KV-FA21M63 Service Manual page 117

N "Channel Setup" setting
Press WEGA GATE and select "Settings".
Press V or v to select the "Channel Setup"
icon ( ), then press
"Cable"
"Auto Program"
"Program Edit"
"Signal Booster"
.
Receive cable TV programs.
Press V or v to select "On", then press
If you select "Cable: On", you will be able to receive 125
cable TV channels.
If there are no cable TV channels, you will receive VHF
broadcast channels only.
To receive only VHF and UHF broadcast channels, select
"Off", then press .
Preset channels automatically.
Edit the channels.
(a) If you wish to keep the channels in the current
condition, press WEGA GATE to exit.
(b) Press V or v to select the program number with the
channel you wish to change. The selected channel will
appear on the screen.
(c) If you wish to edit the channels, press
mode.
Press b until the mode that you wish to edit is
highlighted: Label, Skip,
.
(1) To label, press V or v to select the alphanumeric
characters for the label. Then press
(2) To skip the program number, press V or v to select
"On". Then press
You can skip this program number when using
PROG +/–.
(3) To block unwanted program number, press V or v to
select . Then press
(d) Repeat step (b) to (c) if you wish to change other
channels.
Press WEGA GATE to exit.
Improve the picture quality if the TV signal is too strong or
weak.
Press V or v to select either "Off" if the signal is too strong
(picture distorted; picture with lines; signal interference) or
"Auto" if the signal is weak (snowy picture), then press
Channel Setup
On
Cable:
Auto Program
Program Edit
Signal Booster: Auto
FM Radio Setup
Select Confirm
.
to enter edit
(block symbol). Then press
.
.
.
End
.