Kawai MP9000 Owner's Manual page 64

RPN MSB/LSB
States 2nd Byte 3rd Byte
BnH 65H mmH
BnH 64H WH
n=MIDI channel number :OH-fH(ch.1 - ch. 16)
mm=MSB of the RPN parameter number
lI=LSB of the RPN parameter number
RPN number implemted in MP9000 are the followings
RPN # Data
MSBLSB MSB Function & Range
00H 0OH mmH Pitch bend sensitivity
mm:00H - Och(0 - 12 half tone)
{:ignored(as 00H)
7fH 7fH + RPN NULL
Program Change
Status 2nd Byte
CnH ppH
n=MIDI channel number :OH-fH(ch.1 - ch.16)
pp=Program number 00H - 7fH
After Touch
Status 2nd Byte
DnH ppH
n=MIDI channel! number :O0H-fH(ch.1 - ch.16)
pp=Value :00H - 7fH
*Sending only when EXP CC#=AFT
Pitch Bend Change
Status 2nd Byte 3rd Byte
EnH tH mmH
n=MIDI channel number :0H-fH(ch.1 - ch.16)
"mm, li=Pitch bend vatue" :00 00 - 7f 7fH(-8192 - 0 - +8192)
2.2 Channel Mode Message
2.3 System Real time Message
Active sensing
Status
FEH
63
Default = 02H
Default = OOH
Default = OOH
Default = 40 00H (center)