Table of Contents
Advertisement
CONNECTIONS
CoNNeCTING To a TV
● Important: Before you begin, put the battery into the remote. See page 11 for instructions.
COnnECTIng TO a TV USIng a DIgITaL OPTICaL CaBLE
1. Connect the OPTICaL In (audio) jack on the Soundbar to the oPTICaL ouT jack of the TV with a digital optical
cable.
2. Press the
button on the top panel of the Soundbar or the SOURCE button on the remote control to select
the D.In mode.
+ auto Power Link
If you have connected the main unit to a TV with a digital optical cable, you can set the auto Power function oN
to have the Soundbar turn on automatically when you turn the TV on.
auTo PoWer LINK
oN
oFF
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the
button on the main unit's top panel or the SOURCE button on the remote control to select the
D.In mode.
3. Press the anynet+ button on the remote control to toggle the auto Power Link function on and off.
● Depending on the connected device, auto Power Link may not function.
Optical Cable
OPTICAL OUT
Display
OFF - anynET+ / On - POWER LInK
On - anynET+ / OFF - POWER LInK
OPTICAL IN
HDMI IN
DC 14V
AUX IN
LAN
5V 0.5A
OPTICAL IN
(TV-ARC)
HDMI OUT
18
Advertisement
Table of Contents
