Establishing A Direct Connection With The Cooker Hood - Miele KM 7404 FX Operating And Installation Instructions

Commissioning
Establishing a direct
connection with the cooker
hood
The hob requires max. 2 W in
networked standby.
Availability of the WiFi connection
The WiFi connection shares a frequency
range with other appliances (including
microwave ovens and remote control
toys). This can give rise to sporadic or
even complete connection failures.
Therefore, the availability of featured
functions cannot be guaranteed.
38
Establishing a direct connection with
the cooker hood
You can find the necessary information
on connecting the cooker hood in the
associated operating and installation
instructions.
- Miele cooker hood with
Con@ctivity 3.0
- The hob is not connected to your
home network (Miele@home)
 Switch the hob on.
 Touch the 0 and 7 sensor controls at
the same time for 6 seconds.
The seconds can be seen counting
down in the timer display. After the time
has elapsed, a progress light appears in
the timer display during the connection
attempt. If the connection was
successful, the code : appears in
the timer display. If the connection
could not be established, the timer
display will show the code :. Repeat
the steps above.
When successfully connected,
displays 2 and 3 will light up constantly
on the cooker hood.
 To quit connection mode on the
cooker hood, press the run-on
button .
Con@ctivity 3.0 is now activated.