Panasonic WV-BL730 Operating Instructions Manual page 26

7. Move the cursor to RET and press [=J to return to
the CAM SET UP menu. (To return to the camera
picture, move the cursor to END and press 133).
Caution: When an auto iris lens requiring a DC
control signal is used, the lens iris is fully
opened in ELC mode.
3. Shutter Speed Setting (SHUTTER)
Note: If ELC is selected, this item is not available.
You can select an electronic shutter speed of 1/60
(OFF), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000,
or 1/10 000 seconds.
** CAM SET OP **
CAMERA ZD
OFF "l
ALC/ELC
ALC "1
SHUTTER
AGO
ON
SENS UP
OFF
SYNC I NT
MOTION DET OFF 1
LENS DRIVE DC
END SET UP ENABLE
S__>
Move the cursor to the SHUTTER parameter and select
the electronic shutter speed.
The preset values for SHUTTER (electronic shutter
speed) change by pressing ^0 or as follows:
p-OFF (1/60)—*1/100 —* 1/250 —- 1/500 -1
Li/i0000 *-1/4000 *- 1/2000 *— 1/1000*-1