Disposal Information For Recycling Companies - Fujitsu P2711 TE QHD Disassembly

Disposal information for recycling companies

These instructions are for the complete dismantling of a Fujitsu product. All materials can thereby be disposed of according to their provision in
the EC directive 2012/19/EC (Waste Electrical and Electronic Equipment (WEEE)).
Display
Product group:
Materials which must be disposed of in a special manner
Designation
Printed circuit boards
With a surface area greater than 10 cm²
Batteries
Components containing mercury
Liquid crystal displays (if applicable, together
with the casing) with a surface area greater than
100 square centimetres and backlit displays with
gas discharge lamps
Cathode ray tubes
Capacitors containing PCBs (PolyChlorinated
Biphenyls)
Electrolytic capacitors which contain critical
substances (height > 25 mm; diameter: > 25 mm
or proportional similar volumes).
External electrical cables
Gas discharge lamps
Chlorofluorocarbons (CFC),
hydrochlorofluorocarbons (HCFC) or
hydrofluorocarbons (HFC), hydrocarbons (HC)
Page 13 of 14
Remarks
Mainboard
Power board
PCB inside LCD panel
Key and sensor board
Side USB PCB board
Not contained
Not contained
> 100cm2 display: Yes, for its
display
Gas discharge lamps: No
Not contained
Not contained
Not contained
AC adapter cable, if present
Not contained
Not contained
Quantity
1
1
1
1
1
0
0
1
0
0
0
1
0
0