Advertisement
Quick Links
MDC2 BluOS-D
Mounting Instructions
WHAT'S IN THE BOX
IMPORTANT NOTES
MDC2 BluOS-D can be integrated with the following compatible NAO
products - C369, C389 and C399.
The reference model used in this mounting instruction is C 399.
INSTALL MDC2 BLUOS-D
STEP A
Remove the MDC Classic cover and top cover by loosening and taking out the
screws holding them in place.
STEPB
This PCB assembly includes static sensitive
components, take appropriate precautions.
Take note of the unique Wi-Fi MAC address (the same can
be
found on the MDC2
BluOS-D metal back plate). This is needed when configuring the MDC2 BluOS-D.
2
Remove the protective tape from the contact terminals.
3
Slide MDC2 BluOS-D module through the rail pushing all the way to the
corresponding connectors.
4
Make sure MDC2 BluOS-D module is locked in.
Use corresponding screws to fix back into place MDC2 BluOS-D module and top
cover.
nadelectronics.com/product/mdc2-bluos-d
support.nadelectronics.com
Advertisement
