Set Locks And Timers - Philips 32PFL3007H User Manual

Text 2.5
With Text 2.5, you can view text with more
colours and better graphics than normal text.
If Text 2.5 is broadcast by a channel, it is
switched on by default.
To switch Text 2.5 on or off
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Text 2.5] > [On] or [Off], then
press OK.

Set locks and timers

Clock
You can display a clock on the TV. The clock
displays the time that is broadcast by your
TV service operator.
Display the TV clock
1. While you watch TV, press
2. Select [Clock], then press OK.
The clock is displayed at the top right-hand
corner of the TV screen.
Change the clock mode
You can change the clock mode to
automatic or manual. By default, it is set to
automatic mode, which automatically
synchronises it to Coordinated Universal
Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to
[Manual].
1. While you watch TV, press
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Clock] > [Auto clock].
4. Select [Automatic] or [Manual], then
press OK.
EN 22
OPTIONS.
.
Enable or disable daylight saving time
You can enable or disable daylight saving
time depending on your region. Before you
enable or disable daylight saving time, set the
clock mode to [Auto clock] > [Manual].
1. In the [Clock] menu, select [Daylight
saving].
2. Select [Daylight saving time] or [Standard
time], then press OK.
Daylight saving time is enabled or disabled.
Set the clock manually
You can set the date and time manually.
Before you start, set the clock mode to
[Manual].
1. In the [Clock] menu, select [Date] or
[Time], then press OK.
2. Use the Navigation buttons to make your
selection.
3. Select [Done], then press OK.
Sleeptimer
You can switch the TV to standby after a
specified time. During the countdown to the
specified time, you can switch off your TV
earlier or reset the sleeptimer.
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Sleep timer].
3. Press the Navigation buttons to set the
sleeptimer.
The sleeptimer can be set up to 180 minutes,
in steps of ten minutes. To switch off the
sleeptimer, set it to zero minutes.
4. Press OK to activate the sleep timer.
After the specified time, the TV switches to
standby.