Table of Contents
Advertisement
o-l
6
Selecting a
language
MENU
CURSOR
EXECUTE
You can select one of ten languages
for the on-screen display, using the
remote commander. The initial
setting is English.
10
omenu
Press MENU.
°
» TIMER
SET/
CHECK
The following menu appears on the TV
CLOCK SET
screen.
LANGUAGE
PRESS
[EXE]
LANGUAGE
PRESS
[EXE
3
<=
Press CURSOR (#4/4/¢/) to move the
<] CURSOR > cursor (P) to the desired language, then
we
press EXECUTE.
The menu disappears from the TV screen
and the on-screen display is set to your
language.
EXECUTE
Getting Started
Step 4
Tuning the VCR to
TV channels
V/A AUTO TUNING
1
Set the TV to the video channel:
¢ If the TV is connected to the VCR using
only the aerial cable, the TV should
already be set to the programme
position for the VCR.
e If the TV is connected to the VCR using
the EURO-AV cable, set the TV to video
input.
2
Vv
o
Open the front panel of the VCR and press
Cy jy
AUTOTUNING Y and 4 together for 2 to
AUTO FINE
3 seconds.
The VCR begins tuning in channels
automatically. When all the available
channels are tuned in, the channel in
programme position 1 is displayed.
To switch programme positions
If the allocation of TV channels to programme positions
does not match those on your TV, switch positions as
follows.
1 Open the front panel on the VCR and press TUNER
PRESET.
2 Press PROGRAM +/- to select the programme
position you want to switch.
3
Press the number buttons on the remote commander
to enter the other programme position.
4
Press EXECUTE on the remote commander.
5
Press TUNER PRESET.
Getting Started
7
Advertisement
Table of Contents
