How To Replace Pickup; How To Mount Rotary Tray - Kenwood DP-R792 Service Manual

3. Turn the stopper (@).
5. How to Mount Rotary Tray
1.
2. Move the slide gear frontwards (@) and fix the lock
3. Insert the lock lever pin to the groove of the chassis
4. Fix the hardware with screws (@).
DP-R792/R892/R4440
4. How to Replace Pickup
* Remove the rotary tray before the following
procedures.
1. Short the short lands (@).
2. Remove 2 connectors (@).
4, Remove the pickup upwards (@).
Check the pickup mechanism is at down position
and meet the mark of the gear to the boss of the
pickup mechanism up/down gear (@).
lever to slide gear (@).
(®)