Table of Contents
Advertisement
>
С.
<
9
52
A
б
С.
о
д]
14%
mt
S
ы,
о
2
The Synthesizer Function:
= Changing the Parameters
2. Changing the ATTACK
Press the D5 key. The display should begin to flash
alternately between _ AA and the number 2 10. The
first "A" in the display stands for "ATTACK," and the
second "1" means that the value shown is the ATTACK
of WAVE A. Thus, the ATTACK of WAVE A is 10. Use
the SELECTOR -1 button to change the number to
пп
882.
Next, try pressing the D5 key once again. The display
should begin to flash alternately between -Ab and the
Press again:
number 7 10. This indicates that the ATTACK of
WAVE B is 10. Use the SELECTOR -1 button to change
ыз»
po
Try
playing
a lower key on the FS680 (away
from the
\
Iternately.
гу playing
у
у
es
User Program section). You'll hear that the BOW.
seecton
STRINGS sound now has a much slower attack than it
did previously.
ans
3. Changing the DECAY
Press the D#5 key. The display should begin to flash
alternately between -d^ and the number 774. The
"d" in the display stands for "DECAY," and the "A"
means that the value shown is the DECAY of WAVE A.
Press again.
Hold down one of the FS680's lower keys (away from
|
the User Program section). After holding for about 1
|
ІІ!
seconds, you'll hear WAVE B drop suddenly in volume.
| |
e
That's because you have assigned it a faster DECAY
|
time than WAVE А.
flash alternately.
Advertisement
Table of Contents
