Install Tv Setup - Philips 29PT9015 Manual

INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
J SETUP SETUP
SETUP
J Digital Sources Digital sources
Decoder/Descrambler
Information line
Factory settings
Extra front speakers
Rear speakers
Auto Surround
TV provider none, 0...99
NEX IEW
INSTALLATION
Decoder/Descrambler
J Programme
Programme
Decoder status

Install TV Setup

The Setup menu allows you to adjust initial settings, i.e. those which are not
related to the installation of the TV channels.
The Setup menu contains items that control the settings of the TV's functions,
features, services and peripherals you may have connected.
Use the cursor in the up/down, left/right directions to select the menu item.
Use the OK key to activate.
Use the
Digital sources
See Connect Peripheral Equipment, p. 26 to connect your digital equipment,
like a DVD, a digital satellite tuner or a similar digital device.
on/off
Define Decoder/Descrambler programme numbers
If a decoder or a descrambler is connected, see p. 25, you can define one or
more programme numbers as decoder programme numbers.
Press the cursor left/right to select the input used to connect to your
decoder
Select
activated as a decoder programme number.
Select
EXT2
When selecting the decoder, the message EasyLink: downloading presets....
appears on the screen.
Information line
Select
key on the remote control, a TV channel which broadcasts teletext may
transmit the name of the TV channel, the programme name or another
message.This is displayed on screen next to information about sound, picture
format and DNR setting.
When selected
displayed after the selection of a TV channel or after pressing the
Factory settings
Select
settings, predefined in the factory.
Extra front speakers
See Connect Extra loudspeakers, Amplifier, p. 27.
If no extra front speakers/amplifier are connected, do not change the
predefined factory setting which is No (TV).
Rear speakers
See Connect Extra loudspeakers, Amplifier, p. 27.
If no rear speakers/amplifier are connected, do not change the predefined
factory setting which is No (TV).
key to return or switch menu off.
, or .
Off
EXT1 EXT2
if you do not want the selected programme number being
Off
when the decoder is connected to your EasyLink video recorder.
and after the selection of a TV programme or after pressing the
On
, only sound, picture format and DNR information is
Off
and press the OK key to restore picture and sound
Factory settings
key.
Installation
7