Table of Contents
Advertisement
LR60/RB72
Operator's Manual
5 - PRE-DELIVERY CHECKLIST
To the dealer: inspect the machine thoroughly after assembly to assure it is
functioning properly before delivering it to the customer. The following checklist
is a reminder of points to cover. Check off each item as it is found satisfactory or
after proper adjustment is made.
□ All hardware properly tightened.
□ All decals properly located and readable (see fig. 2).
□ Blades properly installed, blade bolts & nuts tightened.
□ Overall condition (touch up scratches, clean and polish).
□ Test run, check for excessive vibration or overheating of bearings.
□ Operator's Manual.
Review the operator's manual with the customer. Explain the following:
□ Warranty.
□ Safe operation and service.
□ Correct machine installation and operation.
□ Daily and periodic maintenance and inspections.
□ Troubleshooting.
□ Operational procedures and storage.
□ Parts and service.
□ Remove and fill out the Delivery and Warranty Registration form.
□ Give customer the operator's manual and encourage the customer to read the
manual carefully.
IMPORTANT: Warranty is not valid unless Delivery and Warranty Registration
Form in operator's manual is completed in detail and mailed to the Company.
Model Number:
Serial Number:
Delivery Date:
Dealer's Signature:
Pre-Delivery Checklist
14
Cub Cadet Yanmar
Advertisement
Table of Contents
