Advertisement
@ Plug the other ends of the cables into the external input jacks (AUX IN or LINE IN)
of the audio device you're using.
If the audio device inputs use RCA connectors,
remove the quarter-inch adaptors from the ends of the cables.
Be sure to match the L and R outputs of the CM-300
with the L and R inputs of the
audio device.
Under no circumstances should you connect the cables to the MIC IN or PHONES
jack of your audio equipment
damage
could result to the equipment
or speaker
systems.
@ Using Headphones
Use headphones
that have an impedance
between
8 and 150 ohms.
Connecting
head-
phones will have no effect on the signal output from the CM-300's Audio Outs.
Advertisement
