Philips 28PW9525-05L Manual page 28

Connect Peripheral Equipment
28
Stereo amplifier and two extra FRONT speakers
To enhance the sound reproduction of your TV you can connect two extra
speakers via an external amplifier.
Connect the audio cables to the audio input of your amplifier and to
AUDIO L
The output level is controlled by the volume control of your TV.
Note: Switch off the TV and your audio amplifier before connecting them.
AUDIO
Select
See Surround settings, p. 14 for the available Surround modes.
Adjust the volume of the audio amplifier.
You may make use of the Test tone function in the Surround Settings menu,
see p. 13, to have a reference of the loudness of the separate loudspeakers.
Note: Once you have adjusted the volume of the amplifier, do not change it while
Dolby Pro Logic Surround amplifier
Connect the Dolby Pro Logic Surround amplifier to the
the back of your TV.
Select
The audio output is now independent of volume, equalizer and surround
settings.
Switch off the volume of the TV with the mute key
All volume settings, tone control and speaker connections have to be done
via the external Dolby Pro Logic amplifier.
Attention: the sound info on screen will not correspond with the actual sound
If you want to connect more equipment to your TV, consult your dealer.
and at the back of your TV.
R
Set the audio amplifier's volume to minimum.
Extra front speakers Yes (Amp)
watching TV, the volume level of all the speakers is changed with the volume
control of the TV.
Extra front speakers No
reproduction.
in the Setup menu. See p. 7.
AUDIO L
in the Setup menu. See p. 7.
.
and at
R