Table of Contents
Advertisement
Tape Dubbing
Editing from the Other VCR
Here's how to edit from another VCR (such as an 8 mm video camera recorder or a
VHS-format VCR for playback) when using this VCR for recording.
Connection
Notes
* When connecting two VCRs, do
not connect them so that both
VCRs are used as a recording
VCR and a playback VCR
simultaneously. Doing so may
cause a humming noise.
¢ If your playback VCR is equipped
with the S VIDEO output
connector, you can use the S
VIDEO cabie (not supplied) to
connect to the LINE IN S VIDEO
connector on this VCR. This
connection gives you a higher
quality picture than using the video
cable.
* When you use the LINE IN VIDEO
jack and the LINE IN S VIDEO
connector at the same time, the
LINE IN S VIDEO connector has
Priority.
* To avoid deterioration of picture
Quality, remember to switch on the
EDIT function of the other VCR if
the EDIT function is provided with
that VCR.
¢ If your playback VCR is a monaural
unit, connect the white plug to LINE
IN AUDIO L on this VCR and leave
the red plug unplugged. This lets
you record the sound of the
playback VCR on both channels of
this VCR. Do not connect the white
plug to LINE IN AUDIO R.
*
lf your playback VCR is a EURO
21-pin type, use the VMC-216
cable (not supplied).
2 4
Editing
Advertisement
Table of Contents
