talling the Battery Pack
To remove the battery
pack
When you have finished charging the battery, install the battery pack as
follows.
1 Align the flat side of the battery pack with the white line on the camcorder.
2 Make sure that the arrow on the battery pack is close to the top of the
camcorder.
3 Push down and slide the battery pack in the direction of the arrow.
Note:
Make sure the battery is securely installed so that it does not fall. If the battery
is not installed properly, the camcorder will not record accurately.
A fully charged battery pack lasts for:
Type of battery pack
jopie)
(approx. minutes, continuous recording when used indoors)
When the battery becomes weak, the (XJ indication and red lamp blink in the
viewfinder. Wait until they blink rapidly, then replace the battery pack with a
fully charged one.
Getting Started
7
°
> FA
£
2
5
&
»
3
a
5 a
s
5
a
=
Fa ®
wo
=
Cy
<
v Py
6 *